There are a lot of fun things people can do when at home, particularly easy craft. This includes making good things out of junk. Below are some steps on how to make paper beads out of junk materials. Tools needed include glue, scissors, pencil or pen, varnish, ruler, string, an assortment of papers, paper plate, and dowel or toothpick
Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.
Second, place your dowel at the base of the triangle and roll it round itself, starting with the broadest end, until the glued point is wrapped around the dowel. Roll the strip evenly if you want to achieve proportion so that the pointed end is at the center. Use your finger to extend the glue on the bead. This ensures it is more stud, shiny and held together.
Thirdly, roll tightly the triangle onto the dowel. Make certain that the strip is rolled and stuck down before rolling it on your finger. To ensure that it is protected and cylindrical, put a little pressure on it. If it unravels, put on some more glue and hold it still until the glue is set. Several layers of glue can be applied so as to protect your work.
The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.
After the beads are dry and the varnish is well set, remove them from the dowel and place them in strings. Sliding the beads off the cocktail stick is a safe way of removing the beads and ensuring the safety of your work. If some items untie, it shows that the paper was not wrapped or glued well. Think of putting them back to the cocktail stick and add more glue. Leave them to dry for some more hours.
The other step is to ensure you wipe out traces of glue before you start making another bead to prevent it from sticking out. After completion of the above steps, you are now in a position to create long strings and use them to make bracelets, necklaces, earrings, and home decors. Decorate your beads by adding glitter and paint on them.
Though this project might be flimsy, the outcome is dependent on the glue and glaze you use. A number of items can be made out of this task including bracelets, necklaces, rings, and earrings. Home decors can also be made out of this. Before stacking your old papers into the bin, consider making something great out of them.
Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.
Second, place your dowel at the base of the triangle and roll it round itself, starting with the broadest end, until the glued point is wrapped around the dowel. Roll the strip evenly if you want to achieve proportion so that the pointed end is at the center. Use your finger to extend the glue on the bead. This ensures it is more stud, shiny and held together.
Thirdly, roll tightly the triangle onto the dowel. Make certain that the strip is rolled and stuck down before rolling it on your finger. To ensure that it is protected and cylindrical, put a little pressure on it. If it unravels, put on some more glue and hold it still until the glue is set. Several layers of glue can be applied so as to protect your work.
The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.
After the beads are dry and the varnish is well set, remove them from the dowel and place them in strings. Sliding the beads off the cocktail stick is a safe way of removing the beads and ensuring the safety of your work. If some items untie, it shows that the paper was not wrapped or glued well. Think of putting them back to the cocktail stick and add more glue. Leave them to dry for some more hours.
The other step is to ensure you wipe out traces of glue before you start making another bead to prevent it from sticking out. After completion of the above steps, you are now in a position to create long strings and use them to make bracelets, necklaces, earrings, and home decors. Decorate your beads by adding glitter and paint on them.
Though this project might be flimsy, the outcome is dependent on the glue and glaze you use. A number of items can be made out of this task including bracelets, necklaces, rings, and earrings. Home decors can also be made out of this. Before stacking your old papers into the bin, consider making something great out of them.
About the Author:
Learn how to make paper beads by following the instructions we have provided online. The website that reveals the tips can be found at http://www.paperbeadgirl.com.
This article collected, selected and written by: Author Van Hoc
Niche blogs are sometimes referred to as splogs, but this is a misnomer. Even though the desired end result for the niche blogger is to make money...
Get Free Email Updates to your Inbox!
Post a Comment