The number of people using custom aquariums over the years has increased considerably. This can to a large extent be attributed to the fact that these tanks are very versatile, especially as concerns their shapes and sizes. Even more importantly, the cost of building them is much reduced as compared to buying those that are already constructed. Larger tanks are even much cheaper. There however will be need for proper planning to ensure the construction is of high quality. In getting to build custom aquariums Austin residents can benefit from certain useful tips.
When the custom tank is poorly built, it could cause considerable damage to property and even people. This is especially so when they break or develop leaks. When building the tanks, the main materials needed are glass panels, a glass cutter and aquarium silicone. The glass cutter will only be needed in the event that one is planning to cut the glass on their own. Otherwise, it will have no use.
The first very important thing to do is make a final decision of the preferred dimensions. This helps a great deal when it comes to determination of glass thickness that will be needed and also the number of support braces to be used. Most tanks do not exceed 4 feet in length and 24 inches height. These dimensions will require a thickness of 6mm and one support that is centrally placed.
If in any case one looks to build a larger tank, then glass thickness should be between 10 and 12mm. There should be a support brace for every 3 feet so that there is no bowing. The glass needs to be measured and cut for the sides. The other option is to let the cutting be done from a supply store.
In the event that the cutting is done by someone else, they should appreciate the importance of accuracy. The cuts must be neat and exact. If the measurements were to be missed by even a millimeter, there is bound to be a compromise in the integrity of the final product. After the cutting is completed, the pieces will need to be arranged in the order they will be assembled. The arrangement is done on a large flat surface.
The cut bottom panel of the aquarium should have a bead of silicone run all through. Some silicone will also need to applied at the bottom of the entire glass panel, but this only needs to be placed on the sides of the panels. What follows is standing of the panels as the sides beaded sides are pressed together so that there is no bubbling. The task is easier when done by two or more people.
All four sides are joined up against the cut ages from the bottom line, rather than on the top of its face. All the sides then get to be duct taped and the support braces attached with silicone. After 48 hours, the tank is ready for use.
In designing custom aquariums Austin residents should look at the benefits involved. It is a creative and relaxing experience for the individual and their family. The tank will feel like part of the home rather than an accessory.
When the custom tank is poorly built, it could cause considerable damage to property and even people. This is especially so when they break or develop leaks. When building the tanks, the main materials needed are glass panels, a glass cutter and aquarium silicone. The glass cutter will only be needed in the event that one is planning to cut the glass on their own. Otherwise, it will have no use.
The first very important thing to do is make a final decision of the preferred dimensions. This helps a great deal when it comes to determination of glass thickness that will be needed and also the number of support braces to be used. Most tanks do not exceed 4 feet in length and 24 inches height. These dimensions will require a thickness of 6mm and one support that is centrally placed.
If in any case one looks to build a larger tank, then glass thickness should be between 10 and 12mm. There should be a support brace for every 3 feet so that there is no bowing. The glass needs to be measured and cut for the sides. The other option is to let the cutting be done from a supply store.
In the event that the cutting is done by someone else, they should appreciate the importance of accuracy. The cuts must be neat and exact. If the measurements were to be missed by even a millimeter, there is bound to be a compromise in the integrity of the final product. After the cutting is completed, the pieces will need to be arranged in the order they will be assembled. The arrangement is done on a large flat surface.
The cut bottom panel of the aquarium should have a bead of silicone run all through. Some silicone will also need to applied at the bottom of the entire glass panel, but this only needs to be placed on the sides of the panels. What follows is standing of the panels as the sides beaded sides are pressed together so that there is no bubbling. The task is easier when done by two or more people.
All four sides are joined up against the cut ages from the bottom line, rather than on the top of its face. All the sides then get to be duct taped and the support braces attached with silicone. After 48 hours, the tank is ready for use.
In designing custom aquariums Austin residents should look at the benefits involved. It is a creative and relaxing experience for the individual and their family. The tank will feel like part of the home rather than an accessory.
About the Author:
You can visit the website www.fishwhisper.com for more helpful information about Process Of Building Custom Aquariums Austin
This article collected, selected and written by: Author Van Hoc
Niche blogs are sometimes referred to as splogs, but this is a misnomer. Even though the desired end result for the niche blogger is to make money...
Get Free Email Updates to your Inbox!
Post a Comment